Collimo 0.3.0.1

Collimo 0.3.0
Collimo 0.2.0
2026-11-05 19:06:19 +00:00 · 2026-11-05 18:16:53 +00:00 · 2026-11-03 15:46:52 +00:00 · 2026-10-23 17:55:07 +00:00
7 changed files with 233 additions and 39 deletions
@@ -2,12 +2,12 @@ Collimo
 Copyright (c) 2026 COLLIMO LLC. All rights reserved.

 This software and its source code are proprietary and confidential. No
-licence to use, copy, modify, merge, publish, distribute, sublicense or sell
+license to use, copy, modify, merge, publish, distribute, sublicense or sell
 them, in whole or in part, is granted except by a written agreement with
 COLLIMO LLC.

 Collimo is distributed to customers as a built image. Running it is
-governed by the terms of the licence under which that image was obtained.
+governed by the terms of the license under which that image was obtained.

 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
@@ -129,7 +129,12 @@ Add these only if you need them:
 | `POLL_INTERVAL` | `30s` | values below `10s` are clamped |
 | `REQUEST_TIMEOUT` | `20s` | how long one request to a console may take |
 | `UNIFI_SITE` | `default` | you renamed your site |
+| `COVERAGE_SKIP_TAG` | `nobackup` | a Proxmox VE or XCP-ng tag that leaves a VM out of the last-backup check |
+| `COVERAGE_SKIP` | empty | VMs left out of the last-backup check by name, separated by commas; `*` matches any run of characters |
+| `CERT_WATCH` | empty | more certificates for the Renewals tab, as `host` or `host:port` (443 unless given), separated by commas. Every https source, https up-check and UniFi console is watched already |
+| `DOMAINS_WATCH` | empty | domains whose registration end goes on the Renewals tab, separated by commas. Looked up once a day over RDAP, which sends each name to its registry's server |
 | `PORT_SLEEPS` | empty | switch ports whose computer sleeps, as `mac/port` separated by commas: a drop to 100 Mb/s or lower there is expected. The slow-link alert's button writes it |
+| `TOOLS_SCAN_NETWORKS` | empty | narrows where the Tools tab's port scan may go, such as `192.168.1.0/24, 10.20.0.0/16`. Empty, any private address (10/8, 172.16/12, 192.168/16); a network outside those is left out, never added |
 | `UNIFI_OS` | `true` | `false` for a self-hosted standalone controller |
 | `UNIFI_VERIFY_TLS` | `false` | you installed a trusted cert on the console |
 | `PROTECT_ENABLED` | `true` | `false` if you do not run Protect |
@@ -208,7 +213,7 @@ usage, and you tune them there. **Acknowledging an alarm in vCenter clears it
 in Collimo.** Alarms already open when the collector starts are not sent as
 notifications.

-#### XCP-ng, through Xen Orchestra
+#### XCP-ng, through Xen Orchestra (preview)

 XCP-ng 8.3, read through Xen Orchestra's REST API: XCP-ng itself has no
 read-only account. One slot is one Xen Orchestra, and every pool it manages
@@ -300,6 +305,60 @@ has not backed up in a while is highlighted on the page (26 hours by
 default, under Settings → Highlighting) but not alerted on, because a guest
 that was deleted keeps its old group forever.

+#### Veeam Backup & Replication
+
+B&R 12 or later, read through the REST API the backup server itself serves
+on port 9419. In the Veeam console, under **Users and Roles**, add a Windows
+or local account with the **Veeam Backup Viewer** role. It must not have MFA:
+Veeam's REST API can't sign in an account that has it, and Veeam's own
+advice is a service account without.
+
+```
+SOURCE_6=veeam https://veeam01.lab:9419 name=veeam1 user=LAB\collimo
+SOURCE_6_SECRET=<its password>
+```
+
+What it reads: every job's last result and next run, every repository's
+size and free space, and every machine Veeam holds backups of with its
+newest restore point. Those last ones are one request per machine, so they
+are read once an hour. The Viewer role can't read the server's version, so
+the panel shows the newest API revision the server takes and the release it
+came with.
+
+Alerts: a job whose last run failed is bad, one with warnings a warning
+(`backup_task`); a disabled job is never judged. A repository Veeam reports
+offline (`storage_offline`), or nearly full (`storage_full`).
+
+#### HYCU (preview)
+
+Read through the REST API the HYCU controller serves on port 8443. HYCU
+publishes no API reference, so the fields come from its user guide; if
+something reads wrong, the panel and Settings → Diagnostics show what came
+back. Give an account the **Viewer** role in the **Infrastructure** group (a
+Self-service group sees no targets), then make it an **API key** from the
+user menu. With two-factor sign-in on, a key is the only way in.
+
+```
+SOURCE_7=hycu https://hycu01.lab:8443 name=hycu1
+SOURCE_7_SECRET=<the API key>
+```
+
+Or, without a key, `user=` on the line and the password as the secret.
+Alerts: a job that ended in error (`backup_task`), a policy HYCU itself
+judges out of compliance (`backup_policy`), and a target that is unhealthy
+or nearly full.
+
+#### Last backup per VM
+
+With any of Proxmox Backup Server, Veeam or HYCU read, the Virtualization
+tab lists every VM on vCenter, Proxmox VE and XCP-ng with its last backup,
+from whichever of them holds it. Older than two days warns, older than a
+week or none at all is critical (`vm_backup`). A VM on a platform no backup
+server Collimo reads answers for says **not checked**, never "no backup".
+Left out: templates, VMs that haven't run in 30 days, VMs tagged
+`COVERAGE_SKIP_TAG` (`nobackup` unless set) in Proxmox VE or XCP-ng, and VMs
+named in `COVERAGE_SKIP`, such as `build01, test-*`.
+
 #### Synology DSM

 In **Control Panel → User & Group**:
@@ -374,7 +433,7 @@ temperature; and TrueNAS's alert list. Like vCenter, TrueNAS's own alerts
 are the alerts (`nas_alert`): each one not dismissed, WARNING as a warning
 and ERROR or worse as bad. **Dismissing it in TrueNAS clears it here.**

-TrueNAS 25.04 marked the REST API this uses as deprecated, in favour of
+TrueNAS 25.04 marked the REST API this uses as deprecated, in favor of
 JSON-RPC over a WebSocket. It still answers through 25.10; if a later
 release drops it, the slot will say so.

@@ -424,8 +483,11 @@ Each UPS is a panel on the **Power and servers** tab. Alerts: on battery
 (`ups_on_battery`) and battery low or depleted (`ups_battery_low`) are bad;
 battery needs replacing (`ups_battery_replace`, from the UPS's own alarm)
 and 90% load or more (`ups_overload`) are warnings; ten minutes of runtime
-or less is a warning and five or less is bad (`ups_runtime_low`). PDUs are
-not read: each maker's speaks its own MIB.
+or less is a warning and five or less is bad (`ups_runtime_low`). On a paid
+edition, a battery whose runtime at its load has fallen to 75% of its first
+month's, is forecast under ten minutes within 90 days, or is dated over four
+years old warns (`ups_battery_aging`). APC,
+Raritan and Eaton PDUs are read too, and sit on the same tab.

 #### Servers, over Redfish

@@ -458,9 +520,32 @@ redundancy lost (`server_psu`), a drive not OK or predicting failure
 Thermal and Power resources are read; a BMC offering only ThermalSubsystem
 and PowerSubsystem says so on its panel.

+#### Machines without a BMC, over Intel AMT
+
+Kind `amt` reads a machine with no BMC through Intel AMT (vPro mini PCs and
+workstations, such as the Minisforum MS-01), over WS-Management on 16993
+(TLS) or 16992: the BIOS version, the chassis's and baseboard's maker, model
+and serial, processors, memory modules, and AMT's own host name. Only
+Enumerate and Pull are sent. It signs in with HTTP Digest; the account needs
+network access and only the Hardware Asset and General Info realms. One slot
+lists every machine sharing an account; `user=` is required, and `host=`
+names the host each address is, in order, where AMT's host name isn't the
+host's. The slot is read every 5 minutes unless it says `every=`:
+
+```
+SOURCE_7=amt https://10.0.0.98,https://10.0.0.99 name=minis user=collimo host=pve-01,pve-02
+SOURCE_7_SECRET=<the AMT account's password>
+```
+
+Each machine is a panel on the **Power and servers** tab, and its BIOS feeds
+cluster consistency, matched by serial and then by name; a placeholder
+serial such as `Default string` is no serial. AMT's HostOSFQDN is never
+read: only Windows' LMS keeps it current. AMT not answering is
+`source_down`.
+
 ### Inventory reports

-With a vCenter or Proxmox VE slot, the Virtualization tab has an
+With a vCenter, Proxmox VE or XCP-ng slot, the Virtualization tab has an
 **Inventory** panel: every machine, disk, network card, guest partition,
 snapshot, host, datastore and cluster, downloadable as **Excel**, a zip of
 **CSV** files (one per sheet), or a single **HTML** page that needs nothing
@@ -544,18 +629,25 @@ capacity), kept for two years in `capacity/` beside the archive, whatever the
 edition. On first start the inventory runs already held seed the disk and
 allocation history. The **Capacity** tab forecasts when each reaches its
 threshold, with a range, and raises `capacity_runway` when that is close.
+Its **Network** section does the same for uplinks between switches and each
+WAN, at their daily 95th percentile against their speed (a WAN's:
+`CAPACITY_WAN`, else its best speedtest), and for switches' PoE budgets;
+`link_saturation` and `poe_budget` are warnings.

 | Variable | Default | |
 |---|---|---|
 | `CAPACITY_THRESHOLDS` | `cpu=80,mem=80,disk=85,pool=85` | the share of usable capacity, in %, forecasts are for; also `alloc_cpu`, `alloc_mem` and `alloc_disk` against the ratios below (100 by default). `pool` is Ceph and other replicated storage, planned to nearfull |
 | `CAPACITY_RUNWAY` | `warn=90,bad=30` | days left at which a forecast warns, and is critical |
 | `CAPACITY_RATIOS` | `vcpu=4,vmem=1,disk=1.5` | allocation limits: vCPUs per core, VM memory per byte of host memory, provisioned disk per byte |
+| `CAPACITY_ALLOC_ALERTS` | empty | the allocation forecasts that raise runway alerts: `alloc_cpu`, `alloc_mem`, `alloc_disk`. Empty, they are planning only and memory and CPU in use alert |
 | `CAPACITY_VM_SIZE` | `vcpu=4,mem=16,disk=100` | the VM "how many more fit" counts in, memory and disk in GB |
 | `CAPACITY_SUMMARY_TO` | empty | who gets the monthly capacity summary on the 1st, through the SMTP server alert email uses; its own list, not `SMTP_TO` |
 | `CAPACITY_SUMMARY_BY` | empty | a "Prepared by" name on the summary |
+| `CAPACITY_CURRENCY` | USD | the currency the VMware exit report quotes in: USD, GBP, EUR, CAD, INR, BRL or AUD (its form can pick another) |
 | `CAPACITY_HOST` | empty | the host "What to buy" plans in, such as `cores=64,mem=1024` (memory in GB); empty: each cluster's largest |
 | `CAPACITY_DISK_TBW` | empty | each drive model's rated terabytes written, such as `CT1000P310SSD8=220; Samsung SSD 990 PRO 1TB=600`, for disk wear |
 | `CAPACITY_HA` | empty | hosts kept spare per cluster, such as `Prod=1,lab=0`: usable capacity is then the cluster less its largest hosts |
+| `CAPACITY_WAN` | empty | each WAN's download/upload in Mb/s by its network group, such as `WAN=1000/40,WAN2=300/30`, for network capacity. Empty: its best speedtest of the last 30 days; with neither, the WAN is shown and not judged |

 What Proxmox VE cannot tell a read-only token is left out rather than asked
 for: a VM's IP addresses, partitions and guest OS need the QEMU guest agent
@@ -711,9 +803,10 @@ it always wins, and the box on Settings is locked.
 | Name | Default | Meaning |
 |---|---|---|
 | `COLLIMO_ROLE` | `standalone` | `collector` at each site, `hub` for the one that shows them all. `standalone` is one site on its own |
-| `HUB_URL` | empty | on a hub: the address collectors reach it at. It goes into every enrolment code |
-| `HUB_ENROL` | empty | on a collector: the enrolment code made on the hub, used once |
+| `HUB_URL` | empty | on a hub: the address collectors reach it at. It goes into every enrollment code |
+| `HUB_ENROLL` | empty | on a collector: the enrollment code made on the hub, used once |
 | `HUB_LINK` | `normal` | `metered` on a cellular or satellite link: the snapshot every 5 minutes instead of every minute |
+| `HUB_PROXY` | empty | on a collector: an HTTP proxy for its link to the hub alone. `http://tailscale:1055` with the Tailscale sidecar |

 A **collector** watches its site as a standalone install does, and sends
 what it sees to the hub. It only ever calls out to the hub; nothing
@@ -723,15 +816,33 @@ is waiting to send, and its alerts. Records made while the hub is
 unreachable wait on the archive volume and go when it is back.

 The **hub** polls nothing. It shows every site, sends the notifications
-for all of them, and keeps each site's archive. It needs an MSP license,
-which covers the number of sites the key says. On the hub, **Sites → Add a
-site** makes a one-time enrolment code for each new site: paste it into
-that site's `HUB_ENROL`. A code works once and lasts a day. Every message
+for all of them, and keeps each site's archive. It needs an MSP license, or a
+Business license for several offices, which covers the number of sites the key says. On the hub, **Sites → Add a
+site** makes a one-time enrollment code for each new site: paste it into
+that site's `HUB_ENROLL`. A code works once and lasts a day. Every message
 between a collector and the hub is encrypted to the receiver and signed by
 the sender, whatever the route. On a hub, set `RETENTION=400d` to keep
 about 13 months of each site's graphs. The full guide is
 [The hub](https://docs.collimo.dev/msp/hub/).

+### Tailscale
+
+Add `tailscale` to `COMPOSE_PROFILES` and the stack runs a Tailscale sidecar
+that puts Collimo on your tailnet, with no port open on the router:
+
+| Name | Default | Meaning |
+|---|---|---|
+| `TS_AUTHKEY` | empty | an auth key from Tailscale's admin console (**Settings → Keys**). Tag it, so the device never expires. Used once, at the first start |
+| `TS_HOSTNAME` | `collimo` | this stack's name on the tailnet |
+
+The dashboard is then at `https://<TS_HOSTNAME>.<your tailnet>.ts.net` once
+HTTPS certificates are on for the tailnet (Tailscale admin → **DNS**), or at
+`http://<TS_HOSTNAME>` without them. On a hub, that address is `HUB_URL`. On
+a collector, set `HUB_PROXY=http://tailscale:1055` too, so its link reaches
+the hub over the tailnet; nothing else Collimo talks to goes through it. The
+sidecar runs in userspace: no tun device and no added capabilities. Its
+login is kept in the `tailscale-state` volume.
+
 ### Sign-in

 Off until you turn it on, so a dashboard behind a VPN or Cloudflare Access
@@ -1143,7 +1254,7 @@ collimo gitops listening on :8080, polling https://192.168.1.1 every 30s, and 2
 Silence after that is correct. The collector logs failures and state
 changes only.

-Do not try to open a **Console** on the `telemetry` container — the image is
+Do not try to open a **Console** on the `collimo` container — the image is
 `scratch` and has no shell. Check from the host instead:

 ```sh
@@ -1155,7 +1266,7 @@ You want `"network_ok":true` and `"protect_ok":true`.
 Then confirm the interesting metrics are populated:

 ```sh
-curl -s http://localhost:8090/metrics | grep -E 'fan_level|sfp_receive_power|protect_disk'
+curl -s http://localhost:8090/metrics | grep -E 'fan_level|sfp_receive_power|nvr_disk'
 ```

 Empty SFP results are worth interpreting rather than debugging. Your USW
@@ -1237,5 +1348,6 @@ in the way.
 reading stays on screen marked stale rather than blanking — that is
 deliberate.

-**Port detail says history unavailable.** VictoriaMetrics has not
-accumulated enough yet. The six-hour view fills in over six hours.
+**Port detail says history unavailable.** VictoriaMetrics can't be
+reached. A new install shows *Not enough history yet* instead, and the
+six-hour view fills in over six hours.
@@ -11,7 +11,7 @@ I line it up. A collimator is the part of an optical instrument that lines the l

 [![Release](https://img.shields.io/github/v/release/collimohq/collimo-deploy?label=release)](https://github.com/collimohq/collimo-deploy/releases)
 [![Image](https://img.shields.io/badge/image-ghcr.io%2Fcollimohq%2Fcollimo-blue)](https://github.com/orgs/collimohq/packages)
-[![Platforms](https://img.shields.io/badge/platforms-amd64%20%7C%20arm64-lightgrey)](#what-you-need)
+[![Platforms](https://img.shields.io/badge/platforms-amd64%20%7C%20arm64-lightgray)](#what-you-need)
 [![Docs](https://img.shields.io/badge/docs-docs.collimo.dev-informational)](https://docs.collimo.dev)
 [![Status](https://img.shields.io/badge/status-private%20beta-orange)](#help-and-feedback)

@@ -19,7 +19,7 @@ I line it up. A collimator is the part of an optical instrument that lines the l

 - **What the vendor screens bury:** fan speeds, per-port errors, SFP optics, PoE draw, temperatures, NVR disk health.
 - **An outage record that outlives the controller,** with the evidence for whose fault it was.
- **Hypervisors and storage on the same page:** vCenter, Proxmox VE and Ceph, PBS, Synology, QNAP, TrueNAS.
+- **Hypervisors and storage on the same page:** vCenter, Proxmox VE and Ceph, XCP-ng (preview), PBS, Synology, QNAP, TrueNAS.
 - **Other makers' gear too:** managed switches, UPSes and PDUs over SNMP, servers through their BMC over Redfish, and an up-check for anything with an address.
 - **Alerts that mean something now,** not counters from two years ago.
 - **Two containers, nothing built on your host,** set up from a wizard in the browser.
@@ -51,12 +51,13 @@ I line it up. A collimator is the part of an optical instrument that lines the l
 | **UniFi Network** | Fan speeds, temperatures, per-port errors and link speeds, SFP optics, PoE draw, Wi-Fi radios and the channel plan, both WAN links, the cable modem, speed tests, outage history | [Guide](https://docs.collimo.dev/connect/unifi-network/) |
 | **UniFi Protect** | Every camera's state, the recorder's disks and their health, its CPU temperature, each camera's throughput | [Guide](https://docs.collimo.dev/connect/unifi-protect/) |
 | **VMware vCenter and ESXi** | Hosts, maintenance mode, CPU, memory, ESXi build; datastores; VM power state and the busiest VMs; vCenter's alarms | [Guide](https://docs.collimo.dev/connect/vcenter/) |
+| **XCP-ng** (preview, through Xen Orchestra) | Every pool's hosts, storage repositories, the busiest VMs, and Xen Orchestra's alarms | [Guide](https://docs.collimo.dev/connect/xcpng/) |
 | **Proxmox VE and Ceph** | Nodes, quorum, storage use, guests and the busiest of them, Ceph health | [Guide](https://docs.collimo.dev/connect/proxmox/) |
 | **Proxmox Backup Server** | The backup server's health and capacity: datastore use and its own fill estimate, the past week's jobs, when each machine was last backed up | [Guide](https://docs.collimo.dev/connect/pbs/) |
 | **Synology DSM** | Model, DSM version, CPU, memory, temperature; volumes and RAID; drives and their SMART verdicts | [Guide](https://docs.collimo.dev/connect/synology/) |
 | **QNAP** (SNMPv3) | CPU, memory, temperatures and fans; disks and M.2 drives; storage pools | [Guide](https://docs.collimo.dev/connect/qnap/) |
 | **TrueNAS** | Pools, disk read, write and checksum errors, temperatures, TrueNAS's own alerts | [Guide](https://docs.collimo.dev/connect/truenas/) |
-| **Managed switches** (SNMP) | Cisco, Juniper, Aruba, MikroTik and others: ports, speeds, errors, VLANs, temperatures and fans, LLDP neighbours; on Cisco and Juniper also CPU, memory, power supplies, optics and chassis alarms | [Guide](https://docs.collimo.dev/connect/snmp-switches/) |
+| **Managed switches** (SNMP) | Cisco, Juniper, Aruba, MikroTik and others: ports, speeds, errors, VLANs, temperatures and fans, LLDP neighbors; on Cisco and Juniper also CPU, memory, power supplies, optics and chassis alarms | [Guide](https://docs.collimo.dev/connect/snmp-switches/) |
 | **UPS** (SNMP) | On mains or battery, charge, runtime left, load, voltages, battery alarms | [Guide](https://docs.collimo.dev/connect/ups/) |
 | **PDUs** (SNMP) | APC, Raritan and Eaton: draw against the rating, banks, and each outlet | [Guide](https://docs.collimo.dev/connect/pdu/) |
 | **Servers** (Redfish) | Dell iDRAC, HPE iLO, Supermicro, Lenovo XCC: health, temperatures, fans, power supplies, drives | [Guide](https://docs.collimo.dev/connect/redfish/) |
@@ -68,7 +69,7 @@ No UniFi? Collimo can watch only your servers and storage. See [Watching without
 <table>
 <tr>
 <td width="50%"><img src="https://docs.collimo.dev/images/faceplate.png" alt="A switch drawn as its front panel"><br><sub><b>The front panel.</b> Odd ports on top, even below, SFP cages to the right, each lit for its speed. A red outline means errors climbing now; a dashed amber one, slower than that port has run.</sub></td>
-<td width="50%"><img src="https://docs.collimo.dev/images/docsis.png" alt="The cable modem"><br><sub><b>The modem.</b> Why it last re-initialised, and whether it rebooted through an outage.</sub></td>
+<td width="50%"><img src="https://docs.collimo.dev/images/docsis.png" alt="The cable modem"><br><sub><b>The modem.</b> Why it last re-initialized, and whether it rebooted through an outage.</sub></td>
 </tr>
 <tr>
 <td width="50%"><img src="https://docs.collimo.dev/images/outage-ledger.png" alt="The outage ledger"><br><sub><b>The outage ledger.</b> Every outage, its cause, and availability with how much of the window the archive covers.</sub></td>
@@ -185,4 +186,4 @@ Every image carries its software bill of materials (CycloneDX) at `/sbom.cdx.jso

 Collimo and the Collimo logo are trademarks of COLLIMO LLC. © 2026 COLLIMO LLC. All rights reserved.

-UniFi, UniFi Protect and UniFi OS are trademarks of Ubiquiti Inc. VMware, vCenter and ESXi are trademarks of Broadcom Inc. and its subsidiaries; Proxmox of Proxmox Server Solutions GmbH; Synology, QNAP, TrueNAS and the other products named here of their respective owners. They are named only to describe what Collimo reads from, runs on, or sends to. Collimo is an independent project and is not affiliated with, sponsored by, or endorsed by any of them. See [LICENSE](LICENSE) for the terms.
+UniFi, UniFi Protect and UniFi OS are trademarks of Ubiquiti Inc. VMware, vCenter and ESXi are trademarks of Broadcom Inc. and its subsidiaries; XCP-ng and Xen Orchestra of Vates SAS; Proxmox of Proxmox Server Solutions GmbH; Synology, QNAP, TrueNAS and the other products named here of their respective owners. They are named only to describe what Collimo reads from, runs on, or sends to. Collimo is an independent project and is not affiliated with, sponsored by, or endorsed by any of them. See [LICENSE](LICENSE) for the terms.
@@ -25,7 +25,7 @@ services:
    # host.
    # Each release writes its own version and registry in as the defaults,
    # so a blank stack runs it.
-    image: ${COLLIMO_IMAGE:-ghcr.io/collimohq/collimo}:${COLLIMO_VERSION:-0.1.1}
+    image: ${COLLIMO_IMAGE:-ghcr.io/collimohq/collimo}:${COLLIMO_VERSION:-0.3.0.1}
    # Ask the registry on every deploy. A fixed release costs one quick
    # request; qa moves, and this is how a redeploy picks it up.
    pull_policy: always
@@ -102,12 +102,27 @@ services:
      SOURCE_7_SECRET: ${SOURCE_7_SECRET:-}
      SOURCE_8: ${SOURCE_8:-}
      SOURCE_8_SECRET: ${SOURCE_8_SECRET:-}
+      # The last-backup check leaves out VMs with this Proxmox VE or XCP-ng
+      # tag, and VMs named in COVERAGE_SKIP (commas; * matches any run).
+      COVERAGE_SKIP_TAG: ${COVERAGE_SKIP_TAG:-nobackup}
+      COVERAGE_SKIP: ${COVERAGE_SKIP:-}

      # Up-checks: ping, HTTP or a TCP port for anything with an address,
      # entries separated by ; such as
      #   CHECKS=ping 192.168.1.20 name=printer; http https://nas.lab:5001 name=nas
      CHECKS: ${CHECKS:-}

+      # The Renewals tab watches every https source, https up-check and
+      # console's certificate already; CERT_WATCH adds host[:port] entries,
+      # commas between. DOMAINS_WATCH looks domains up over RDAP once a day,
+      # which sends each name to its registry: empty, none.
+      CERT_WATCH: ${CERT_WATCH:-}
+      DOMAINS_WATCH: ${DOMAINS_WATCH:-}
+
+      # The Tools tab's port scan reaches private addresses only; this can
+      # narrow it to some of them, such as 192.168.1.0/24.
+      TOOLS_SCAN_NETWORKS: ${TOOLS_SCAN_NETWORKS:-}
+
      # Sign-in. Off until ADMIN_PASSWORD (free) or OIDC_* / LDAP_* (paid)
      # are set. See PORTAINER.md.
      ADMIN_USERNAME: ${ADMIN_USERNAME:-admin}
@@ -142,8 +157,13 @@ services:
      # own.
      COLLIMO_ROLE: ${COLLIMO_ROLE:-standalone}
      HUB_URL: ${HUB_URL:-}
-      HUB_ENROL: ${HUB_ENROL:-}
+      HUB_ENROLL: ${HUB_ENROLL:-}
      HUB_LINK: ${HUB_LINK:-normal}
+      # On a collector with the Tailscale sidecar: http://tailscale:1055,
+      # for its link to a hub on the tailnet. Nothing else goes through it.
+      HUB_PROXY: ${HUB_PROXY:-}
+      # The Tailscale sidecar's name, only so Settings can show it.
+      TS_HOSTNAME: ${TS_HOSTNAME:-collimo}

      # Notification channels. Each is off until its variables are set; any
      # number can be on. Slack, Teams, PagerDuty and the webhook are paid.
@@ -216,15 +236,22 @@ services:
      CAPACITY_THRESHOLDS: ${CAPACITY_THRESHOLDS:-cpu=80,mem=80,disk=85,pool=85}
      CAPACITY_RUNWAY: ${CAPACITY_RUNWAY:-warn=90,bad=30}
      CAPACITY_RATIOS: ${CAPACITY_RATIOS:-vcpu=4,vmem=1,disk=1.5}
+      # Allocation forecasts that alert (alloc_cpu, alloc_mem, alloc_disk);
+      # empty, they are planning only and what is in use alerts.
+      CAPACITY_ALLOC_ALERTS: ${CAPACITY_ALLOC_ALERTS:-}
      CAPACITY_VM_SIZE: ${CAPACITY_VM_SIZE:-vcpu=4,mem=16,disk=100}
      CAPACITY_HA: ${CAPACITY_HA:-}
      # The monthly capacity summary: who gets it, whose name is on it, and
      # the host "What to buy" plans in (empty: each cluster's largest).
      CAPACITY_SUMMARY_TO: ${CAPACITY_SUMMARY_TO:-}
      CAPACITY_SUMMARY_BY: ${CAPACITY_SUMMARY_BY:-}
+      CAPACITY_CURRENCY: ${CAPACITY_CURRENCY:-}
      CAPACITY_HOST: ${CAPACITY_HOST:-}
      # Rated endurance per drive model, for disk wear: CT1000P310SSD8=220
      CAPACITY_DISK_TBW: ${CAPACITY_DISK_TBW:-}
+      # Each WAN's download/upload in Mb/s, for network capacity:
+      # WAN=1000/40. Empty: its best speedtest of the last 30 days.
+      CAPACITY_WAN: ${CAPACITY_WAN:-}
      # A copy of every inventory in PostgreSQL, for Grafana and Power BI
      # (paid). For the stack's own, add "postgres" to COMPOSE_PROFILES and
      # set INVENTORY_DB_PASSWORD; for one you run, set INVENTORY_DB_URL. The
@@ -315,8 +342,10 @@ services:
        max-file: "3"

  victoria-metrics:
-    # Pin to a release tag once you have one you are happy with.
-    image: victoriametrics/victoria-metrics:latest
+    # Pinned, like Collimo itself, so a redeploy never pulls a release we
+    # haven't run. It moves forward with a Collimo release, never back:
+    # VictoriaMetrics supports upgrading its data, not downgrading it.
+    image: victoriametrics/victoria-metrics:v1.155.0
    container_name: collimo-victoria-metrics
    restart: unless-stopped
    command:
@@ -458,6 +487,57 @@ services:
    security_opt:
      - no-new-privileges:true

+  # ---- Optional: Tailscale, to reach Collimo on your tailnet ------------
+  #
+  # Starts only with "tailscale" in COMPOSE_PROFILES, and TS_AUTHKEY set to
+  # an auth key from Tailscale's admin console (Settings → Keys); tag it so
+  # the device never expires. It joins the tailnet as TS_HOSTNAME and
+  # serves the dashboard at https://<TS_HOSTNAME>.<your tailnet>.ts.net,
+  # with no port open on the router. On a hub, that is HUB_URL. It also
+  # offers a proxy on :1055, which a collector's link to that hub uses
+  # through HUB_PROXY=http://tailscale:1055.
+  #
+  # Userspace networking: no tun device and no added capabilities. The
+  # dashboard is served over HTTPS when the tailnet has HTTPS certificates
+  # turned on (Tailscale admin → DNS), and over plain HTTP on port 80
+  # otherwise, which WireGuard still encrypts.
+  tailscale:
+    profiles: ["tailscale"]
+    image: tailscale/tailscale:stable
+    container_name: collimo-tailscale
+    hostname: tailscale
+    restart: unless-stopped
+    environment:
+      # Under containerboot's other name for it, so the key is never
+      # passed to Collimo itself.
+      TS_AUTH_KEY: ${TS_AUTHKEY:-}
+      TS_HOSTNAME: ${TS_HOSTNAME:-collimo}
+      TS_STATE_DIR: /var/lib/tailscale
+      TS_SOCKET: /var/run/tailscale/tailscaled.sock
+      TS_USERSPACE: "true"
+      TS_OUTBOUND_HTTP_PROXY_LISTEN: ":1055"
+    # containerboot starts tailscaled and logs in; once it is up, the
+    # dashboard is served on the tailnet, set afresh on every start. Each
+    # try is timed: with Serve off for the tailnet, tailscale waits for
+    # someone to turn it on, and the proxy must not wait with it.
+    entrypoint: ["/bin/sh", "-c"]
+    command:
+      - |
+        /usr/local/bin/containerboot &
+        boot=$$!
+        until tailscale status >/dev/null 2>&1; do kill -0 $$boot 2>/dev/null || exit 1; sleep 2; done
+        # Status answers from the cached map before control does; HTTPS asked
+        # for then fails at once. Wait up to a minute for the tailnet's
+        # certificate domain, then serve afresh: HTTPS with it, HTTP without.
+        i=0; until tailscale status --json 2>/dev/null | grep -q '"CertDomains": \['; do i=$$((i+1)); [ $$i -ge 30 ] && break; sleep 2; done
+        tailscale serve reset >/dev/null 2>&1
+        if [ $$i -lt 30 ]; then timeout 30 tailscale serve --bg --https=443 http://telemetry:8080; else echo 'collimo: HTTPS certificates are off for this tailnet (Tailscale admin -> DNS); serving plain HTTP'; false; fi || timeout 30 tailscale serve --bg --http=80 http://telemetry:8080 || echo 'collimo: could not serve on the tailnet; is Serve allowed for it?'
+        wait $$boot
+    volumes:
+      - tailscale-state:/var/lib/tailscale
+    security_opt:
+      - no-new-privileges:true
+
 volumes:
  vm-data:
  ledger-data:
@@ -465,3 +545,4 @@ volumes:
  igotify-data:
  apprise-config:
  postgres-data:
+  tailscale-state:
@@ -1,16 +1,16 @@
 {
  "bomFormat": "CycloneDX",
  "specVersion": "1.5",
-  "serialNumber": "urn:uuid:f330aedf-dba8-410a-9613-4c5af7242265",
+  "serialNumber": "urn:uuid:6e119961-ca9e-4204-b075-3d8022668bed",
  "version": 1,
  "metadata": {
-    "timestamp": "2026-10-22T20:48:48Z",
+    "timestamp": "2026-11-05T19:05:33Z",
    "component": {
      "type": "container",
      "bom-ref": "collimo-image",
      "name": "collimo",
-      "version": "0.1.1",
-      "purl": "pkg:oci/collimo@0.1.1?repository_url=ghcr.io/collimohq/collimo&arch=amd64",
+      "version": "0.3.0.1",
+      "purl": "pkg:oci/collimo@0.3.0.1?repository_url=ghcr.io/collimohq/collimo&arch=amd64",
      "properties": [{"name": "base-image", "value": "scratch"}]
    }
  },
@@ -19,9 +19,9 @@
      "type": "application",
      "bom-ref": "collimo",
      "name": "collimo",
-      "version": "0.1.1",
+      "version": "0.3.0.1",
      "description": "The Collimo collector, a static linux/amd64 binary",
-      "purl": "pkg:generic/collimohq/collimo@0.1.1?arch=amd64"
+      "purl": "pkg:generic/collimohq/collimo@0.3.0.1?arch=amd64"
    },
    {
      "type": "library",
@@ -1,16 +1,16 @@
 {
  "bomFormat": "CycloneDX",
  "specVersion": "1.5",
-  "serialNumber": "urn:uuid:2b431bd4-f4c1-4b6d-9e7e-bf9b4e66e5ba",
+  "serialNumber": "urn:uuid:6dbafb30-e1b1-4831-8898-55236673bc74",
  "version": 1,
  "metadata": {
-    "timestamp": "2026-10-22T20:48:48Z",
+    "timestamp": "2026-11-05T19:05:27Z",
    "component": {
      "type": "container",
      "bom-ref": "collimo-image",
      "name": "collimo",
-      "version": "0.1.1",
-      "purl": "pkg:oci/collimo@0.1.1?repository_url=ghcr.io/collimohq/collimo&arch=arm64",
+      "version": "0.3.0.1",
+      "purl": "pkg:oci/collimo@0.3.0.1?repository_url=ghcr.io/collimohq/collimo&arch=arm64",
      "properties": [{"name": "base-image", "value": "scratch"}]
    }
  },
@@ -19,9 +19,9 @@
      "type": "application",
      "bom-ref": "collimo",
      "name": "collimo",
-      "version": "0.1.1",
+      "version": "0.3.0.1",
      "description": "The Collimo collector, a static linux/arm64 binary",
-      "purl": "pkg:generic/collimohq/collimo@0.1.1?arch=arm64"
+      "purl": "pkg:generic/collimohq/collimo@0.3.0.1?arch=arm64"
    },
    {
      "type": "library",
@@ -2,7 +2,7 @@
 # variable, this file's and the rest, from what the stack is running with.

 # Required: the release to run, such as 0.9.0, or qa for the build under test.
-COLLIMO_VERSION=0.1.1
+COLLIMO_VERSION=0.3.0.1

 # false watches only hypervisors and storage, with no UniFi console at all,
 # and is what to set while trying this stack beside an existing one.
Author	SHA1	Message	Date
Collimo release	e8a59b9376	Collimo 0.3.0.1	2026-11-05 19:06:19 +00:00
Collimo release	d9ffbd88bd	Collimo 0.3.0	2026-11-05 18:16:53 +00:00
Collimo release	09db322ec0	Collimo 0.2.0	2026-11-03 15:46:52 +00:00
Collimo release	d01b8c101f	Collimo 0.1.2	2026-10-23 17:55:07 +00:00